Todd. There are more parts to seize in an engine than just the pistons.
On an engine that has been sitting in one place for 15 years it is likely
that some of the valves are also stuck open, so even if you are fortunate
enough to free the piston rings from the bores, it is highly likely that
you will then run into problems with the valves. Fortunately on a LR the
valves are vertical so if they do get hit by the piston it tends to push
them back in. I agree with John, take the top off and do the job
properly, it will need doing sometime, ebven if you manage to get it
going it will probably have lots of crank case pressure and burn oil, why
not start out doing it right.
Regards
Bill Leacock
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Sun Jan 19 2003 - 16:47:21 EST