RE: [lro] 2.25 Serial Number

• Previous message: John Cranfield: "Re: [lro] Power Loss"
• In reply to: John M. Baker: "[lro] 2.25 Serial Number"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

AC ??? Sootch Loooogshuree!

>
> Thanks Todd. That explains why I can't see it. My AC compressor
> mount covers
> that portion of the head and block!
>
> Regards,
>
> John
>
> Cheers John
>
> The serial number is stamped into the block on the left hand side (facing
> forward). If you could pop the cylinder head off like the head from a
> daisy, you would find the s/n on the most forward, highest part of the
> casting, on the left side. You may need to take a stiff brush
> (not wire) to
> it and view it in the dark, sidelit with a flashlight (torch). Even then,
> 8's and 3's may take some squinting.
>
> Does that make sense?
>
> Todd
> _______________________________________________
> LRO mailing list
> LRO@land-rover.team.net
> http://land-rover.team.net/mailman/listinfo/lro
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro

• Next message: Peter Ogilvie: "Re: [lro] Series IIA Brakes Saga"
• Previous message: John Cranfield: "Re: [lro] Power Loss"
• In reply to: John M. Baker: "[lro] 2.25 Serial Number"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Tue Nov 19 2002 - 11:37:34 EST